Error codes wont go away. Car is in limp mode please help!!!

Post Reply
cowboy9299
Posts: 4
Joined: Fri Sep 13, 2019 9:44 pm

Error codes wont go away. Car is in limp mode please help!!!

Post by cowboy9299 »

I have a 2016 civic ex turbo. Went through all the steps. Just uploaded the dual psi tune. Said flash was successful but error codes didnt go away putting the car into limp mode not allowing the engine to rev past 2500 rpm.
KTuner
Site Admin
Posts: 2944
Joined: Mon Jul 22, 2013 8:13 pm

Re: Error codes wont go away. Car is in limp mode please hel

Post by KTuner »

Check the error codes, which you can do in the KTuner software via the toolbar. Then proceed to fix the issue outlined by the error codes. If you have a U0301 code then you chose the wrong codebase to start from in File>New Tune. The description for those selections outlined you should have matched yours in Tools>KTuner Unit Info before flashing. Choose the other one that you didn't choose last time if that's the case.
cowboy9299
Posts: 4
Joined: Fri Sep 13, 2019 9:44 pm

Re: Error codes wont go away. Car is in limp mode please hel

Post by cowboy9299 »

KTuner wrote:Check the error codes, which you can do in the KTuner software via the toolbar. Then proceed to fix the issue outlined by the error codes. If you have a U0301 code then you chose the wrong codebase to start from in File>New Tune. The description for those selections outlined you should have matched yours in Tools>KTuner Unit Info before flashing. Choose the other one that you didn't choose last time if that's the case.
Giving the code U0038 what should I do?
KTuner
Site Admin
Posts: 2944
Joined: Mon Jul 22, 2013 8:13 pm

Re: Error codes wont go away. Car is in limp mode please hel

Post by KTuner »

Clear codes. That code wouldn't cause limp mode.
cowboy9299
Posts: 4
Joined: Fri Sep 13, 2019 9:44 pm

Re: Error codes wont go away. Car is in limp mode please hel

Post by cowboy9299 »

Tcm failed dont know if the ktuner caused it but that part is expensive.
KTuner
Site Admin
Posts: 2944
Joined: Mon Jul 22, 2013 8:13 pm

Re: Error codes wont go away. Car is in limp mode please hel

Post by KTuner »

We don't communicate, flash, or have anything to do with the TCM. The vehicle wouldn't drive without a minimally operational TCM.
cowboy9299
Posts: 4
Joined: Fri Sep 13, 2019 9:44 pm

Re: Error codes wont go away. Car is in limp mode please hel

Post by cowboy9299 »

Thanks anyway think it's a common problem I'll have to deal with
KTuner
Site Admin
Posts: 2944
Joined: Mon Jul 22, 2013 8:13 pm

Re: Error codes wont go away. Car is in limp mode please hel

Post by KTuner »

Definitely not common or you'd see much more talk about the TCM from the community.
Post Reply

Return to “KTunerFlash V1.2 Specific Questions”