TPS Calibration Issues (Continued)

Audiophyle
Posts: 76
Joined: Sun Aug 18, 2013 8:16 pm

Re: TPS Calibration Issues (Continued)

Post by Audiophyle »

Ha ha ha, no I copied over the ignition tables from the PZD to the PRB. What I couldnt figure out is why at idle the table ignition read 30* but the actual ignition was at 0*. The PZD ignition did not do this, but like I said there was probably a setting or something I missed or mixed up.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: TPS Calibration Issues (Continued)

Post by KTuner »

Idle ignition parameters are right there in parameters, as idle ignition overrides the standard ignition tables. Hence the setting for .5% TPS when no IACV is used. You would have noticed that previously when your TPS read 0, but obviously when it was over .5 it would be running from the main ignition tables.
Audiophyle
Posts: 76
Joined: Sun Aug 18, 2013 8:16 pm

Re: TPS Calibration Issues (Continued)

Post by Audiophyle »

That would make sense, thanks!
Post Reply

Return to “03-06 Element Specific”