Can’t get PWM to work with pzd ecu
Can’t get PWM to work with pzd ecu
I’m having a issue where I can’t get any boost but wastegate pressure. Im using a MAC solenoid with one wire to ign 12v when on and the other to b21 with it enable in the software and nothing. I tried with two solenoid, one 4 port and the 3 port with no luck. I’m using the ktuner PRB codebase boost support, Is there something that I’m missing?
Re: Can’t get PWM to work with pzd ecu
If it's properly setup you'll see PWM Duty in logging. If so the ECU would be outputting.