KTuner End User Board for 06-07 Accord

Post Reply
igsequeira77
Posts: 3
Joined: Sun Jun 14, 2020 5:50 pm

KTuner End User Board for 06-07 Accord

Post by igsequeira77 »

Hello, I need some guidance, I have a 2006 Honda Accord EX Sedan, 4 cyl, MT. A couple of weeks ago, my car's ECU got wet due to AC evaporator leak. I decided to buy a used ECU and also I purchased a KTuner in-ECU end user board as specified on the KTuner website. I sent the ECU to an authorized KTuner dealer to be socketed and board installation which is in transit right now. My questions are: Is this is going to be a plug and play ECU? Since I do not have any enhancements like intake or exhaust systems installed in the car, do I have to do something with the KTuner software to make the car run? Is it needed to do something with the Immobilizer? Any help and guidance will be highly appreciated.
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: KTuner End User Board for 06-07 Accord

Post by KTuner »

You don't need modifications.

Information about VIN and Immobilizer are right on the application page for this vehicle.
https://ktuner.com/accord0607/
Post Reply

Return to “Hardware Installation Questions”