KTuner.com

Hi I have a 2007 Honda Accord 2.4 with 5 speed MT which I swapped with a 2012 civic SI 6 speed Manual transmission . I was looking to see if I can get some info If I would be able to change the output signal of the vehicle speed sensor so that I could correct my speedometer. Also would I be able to remove or modify the speed limiter, remove or modify rev limiter and also would I be able to get an output for the reverse lockout solenoid.

I also wanted to clear that on the Ktuner specs website where it says there is no Real-Time Tuning Mode there is no check on end user. what does Real-Time Tuning Mode mean and does this mean if I get End User KTuner I wont be abte to do mods or southing.

There are options to calibrate the speed sensor.

There is some real-time options for this platform.

Speed limiter is disabled by default. You have access to rev limiters and many other settings in the software.

You can start with the 04-06 TSX base, which is based on the 06-07 Accord, to enable reverse lockout if you're using an AT ECU. 06-07 MT ECU doesn't have that output.

I am sorry if I am asking the same question again. I just want to be clear.
I was talking to 1 of the dealers in oshawa, Ontario, canada.
He told me that there are couple of extra connector pins on my ecu that can be used as outputs one of which I can use as reverse lockout.
Secondly there is no enabling for speed limiter. As I am trying to take my accord on a track and would like to know about disabling speed limiter.
* If I forgot to mention I have a 2007 k24a8 accord with MT transmission and stock ECU

Thank you.

That's incorrect. Only the RSX platform can retask other outputs at this time. Please see my previous replies, as it answers all of your questions.