KTuner.com

I am having trouble finding the idle stop start control for my 2021 RDX in the KTuner software. I was told that the control was released from beta and under the “quick enables”. However, the only controls that are listed are “disable throttle dampening and 4 bar map sensor”. My KTuner software version is 1.0.12.6. any help on this subject would be appreciated.

All parameters are available on the left hand side when you open a tune.

After talking with several people that have the .5 software it was noted that the “Disable Idle Stop/Start is not in the .6 version for the 2021 RDX. Not sure if this was intentional due to other issues but if not, can your team add this back to the .6 software please. There is a thread on ACURAZINE with screenshots discussing this issue. https://acurazine.com/forums/3g-rdx-per ... e-1003222/

The option is still present in the current version, so email us with a tune file and your ECU number.

Hey all. I found the fix for this. Renistall all software from the Ktuner site. Check all the box's to install/reinstall. The auto stop/start disable will show up, it did for me.

Tony

Excellent.