Lambda table

Post Reply
7thGenLucifer
Posts: 19
Joined: Sun Aug 08, 2021 5:20 pm

Lambda table

Post by 7thGenLucifer »

Thanks again for your patience in explaining the "ins and outs" of tuning..

So I'm using the lambda tables to monitor my AF for each cell. Is there a reason why the first column (idle/high vacuum) and the last column (WOT) don't display any data. Once in a while, a few cells will record in the WOT column. But extremely rare. Am I doing something wrong or can I fix this?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Lambda table

Post by KTuner »

As you'll notice the information stored in the cells occurs when those cells are hit. If they're not hit, there's no info in them.
7thGenLucifer
Posts: 19
Joined: Sun Aug 08, 2021 5:20 pm

Re: Lambda table

Post by 7thGenLucifer »

Would adjusting the parameter at the top of the column work?

Or is this something deeper in the software?

I ask because while I'm driving I can see its taking data from those columns. I'd like it to be as precise as possible
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Lambda table

Post by KTuner »

It is being precise already. The cell that has the weighted average is the one that gets the hit.
Post Reply

Return to “KTunerFlash V1.2 Specific Questions”