Need custom map support
Need custom map support
I finally got my built done but i have a issue with my map im running 20psi boost on my engine and the stock map cant support more than 10.5psi so i decided to change it for a 4bar map but this platform dont have custom map support wich leads me to my question, when will this feature be available?
Re: Need custom map support
In a future update I imagine. I haven't seen anyone interested in the feature and generally I don't spend time on those.
Re: Need custom map support
Si basically i wont be able to do anything until that update comes up; let say i change the pinout to match the rsx would it work with the type s ecm ? Because i really cant wait forever for that to come i would prefered to switch the ecu to haltech or something similar to that
Re: Need custom map support
I'll try to get that feature out.
The 05-06 RSX has the same pinout. You can load the RSX code onto your ECU. It will not run the dashboard with that code loaded onto it, though.
The 05-06 RSX has the same pinout. You can load the RSX code onto your ECU. It will not run the dashboard with that code loaded onto it, though.
Re: Need custom map support
Thanks a lot for the feature, even tho it says that is on beta not on the released features i was able to setup the 4bar map on the accord with the right map so all my gauges are working.
Re: Need custom map support
Yes, it was released. Thank you for reminding me to change the site.