Thanks again - I don't have the secondary setup, so I'll look for the disable on that.KTuner wrote:Resourceful! I like it.
For P2185 if you don't have the secondary ECT setup there is a disable for it. If you do, definitely check wiring.
P0102, you can disable MAF on these and run speed density via the fuel maps. This may be your issue with fueling if the MAF is not operating correctly.
I will look into the MAF disable, after I check the wiring to make sure it's not my error.
I saw on the KTuned website this footnote (they suggested I buy one of their $$$ TPS switches when I queried the mount needing to be modded):
* Please ensure that your TPS sensor is not reading 0 when installed and calibrated. The TPS should be set at 1-2% open, this will ensure your car does not go into fuel cut which occurs when the TPS see a 0% reading.
Is that accurate info?