Terms Definition of Tuning Maps

darrentsui
Posts: 2
Joined: Thu Jun 11, 2020 5:05 pm

Terms Definition of Tuning Maps

Post by darrentsui »

Hi Sirs,

I could only see five options in Tuning Map, namely:-
1) Ignition Base;
2) Ignition Base 2;
3) Ignition Maximum;
4) WOT Enrichment;
5) WOT Enrichment Cat Heating.

May I know the differences between Ignition Base / Ignition Base 2 / Ignition Maximum ??

Ignition Base = Ignition Table Value?

Ignition Base 2 = ?

Ignition Maximum = Knock Ignition Limitation?

Do we have Knock Retard Table for our Fit?

Thanks.


Regards,
Darren
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Terms Definition of Tuning Maps

Post by KTuner »

Ignition bases are used in different conditions. Ignition maximum is the maximum ignition, also used to calculate final ignition output. No need for retard. If you're not pushing sensitivity knock control will lower and you'll get less retard.
darrentsui
Posts: 2
Joined: Thu Jun 11, 2020 5:05 pm

Re: Terms Definition of Tuning Maps

Post by darrentsui »

KTuner wrote:Ignition bases are used in different conditions. Ignition maximum is the maximum ignition, also used to calculate final ignition output. No need for retard. If you're not pushing sensitivity knock control will lower and you'll get less retard.
For x axis of the Ignition Maximum, the unit is Unk. Is it "Unknown"?

How to compare it with other units of Loading, e.g.mBar/PSI/kPA?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Terms Definition of Tuning Maps

Post by KTuner »

It's a calculated load within the ECU that's not a data item in the factory protocols that we use.
Lith
Posts: 4
Joined: Thu Jul 23, 2020 2:11 am

Re: Terms Definition of Tuning Maps

Post by Lith »

KTuner wrote:Ignition bases are used in different conditions. Ignition maximum is the maximum ignition, also used to calculate final ignition output. No need for retard. If you're not pushing sensitivity knock control will lower and you'll get less retard.
I had been looking into getting the Ktuner V1 for my 2016 Honda Jazz RS and just doing some homework to ensure it will suit my car, and offer what I need from it - but going by this all I can do is change the lambda targets on WOT and adjust ignition timing? No ability to tune cam timing, MAF calibration or anything else like that?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Terms Definition of Tuning Maps

Post by KTuner »

If your ECU is supported you have MAF and CAM as well.
Lith
Posts: 4
Joined: Thu Jul 23, 2020 2:11 am

Re: Terms Definition of Tuning Maps

Post by Lith »

KTuner wrote:If your ECU is supported you have MAF and CAM as well.
Ok, cool - thanks. Does that mean this post is out of date, as the ones listed don't include those tables?

Is there a resource which shows all the adjustable settings for supported ECUs? I'll check which ECU mine has this weekend, I'm hoping that having a NZ Jazz won't make too much of a difference.
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Terms Definition of Tuning Maps

Post by KTuner »

Both of the things you mentioned would be found in parameters, as they're 2D, not 3D tables.
Lith
Posts: 4
Joined: Thu Jul 23, 2020 2:11 am

Re: Terms Definition of Tuning Maps

Post by Lith »

KTuner wrote:Both of the things you mentioned would be found in parameters, as they're 2D, not 3D tables.
Ok, that makes sense - thanks :)
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Terms Definition of Tuning Maps

Post by KTuner »

No problem
Post Reply

Return to “15+ Fit”