37820-5AG-P83 ECU Cannot Enable P0299

[b6221]

Hi KTuner,

I prefer to enable all stock ECU monitoring when calibrating/tuning my car. I used Stage 2 21 PSI Dual map as basemap in creating my custom tune. I could un-check the check box for P0299 - Underboost condition, and I could save the calibration normally (no error message).

However, when I re-open the calibration and check Disable/Monitors section, P0299 - Underboost condition disable option is automatically activated.

I checked the Beta codebase and Beta codebase has no issue because I can enable P0299 option and the option didn't activate automatically.

Please advise.

Thank You

[KTuner]

It's off by default on that codebase.

[b6221]

It's off by default on that codebase.

Got it. Thanks for clarifying.

[KTuner]

No problem