Base Map & fuel injectors

Post Reply
7thGenLucifer
Posts: 19
Joined: Sun Aug 08, 2021 5:20 pm

Base Map & fuel injectors

Post by 7thGenLucifer »

Hey there,
So i'm working with a Honda Accord J series. I originally began the build with a J30 and did the swap using the 07 Acura TL type S manual transmission ECU. With that being said I was using my OEM 240cc injectors all this time and seems to be ok without choosing any different settings in the tune. I just upgraded the engine to the actual type S 3.5 now and I'm left wondering what to do with the injectors. I have the type S injectors as well. Which is the base calibration meant to use? I bet a lot of Accord guys out there might like to know this too as they might have done exactly what I did but with the 3.2 setup (same 240 injectors)
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Base Map & fuel injectors

Post by KTuner »

If you start with a Type-S map the fuel maps are designed for factory injectors for that vehicle. We don't alter fueling.

If you want to alter fueling to scale for different injectors you can use the individual cylinder trims.
Post Reply

Return to “07-08 TL Specific”