KTuner.com

Posted: **Wed Aug 18, 2021 10:55 pm**

Hi! I’ve wired in the can harness from hondata and will use a compatible 07 TL ecu.

Is there a starting point / basemap for the J30a4 engine or is it just the J32?

I wanted to ask before I sync the immo to the new ecu. If there’s not a map it’ll take me a weekend to tune it. If there’s a map I can do it on a week night.

Thanks,
- Jason

Posted: **Wed Aug 18, 2021 10:56 pm**

I also have the conversion harness for the ecu from Boomslang. I forgot to mention that.

Posted: **Thu Aug 19, 2021 4:05 am**

A factory starting point is included for tuning purposes.

Posted: **Wed Aug 25, 2021 5:15 pm**

I have the same engine, the starting point tune isn't far off. I used it and was able to get things lined out in an evening

Posted: **Wed Aug 25, 2021 8:01 pm**

7thGenLucifer wrote: ↑Wed Aug 25, 2021 5:15 pm I have the same engine, the starting point tune isn't far off. I used it and was able to get things lined out in an evening

That's good to hear

KTuner.com

Starting point for 03-07 Accord v6-6MT J30a4

Starting point for 03-07 Accord v6-6MT J30a4

Re: Starting point for 03-07 Accord v6-6MT J30a4

Re: Starting point for 03-07 Accord v6-6MT J30a4

Re: Starting point for 03-07 Accord v6-6MT J30a4

Re: Starting point for 03-07 Accord v6-6MT J30a4