Starting point for 03-07 Accord v6-6MT J30a4

Post Reply
Jasonvictory86
Posts: 39
Joined: Tue Sep 05, 2017 4:20 pm
Location: Dallas, Texas

Starting point for 03-07 Accord v6-6MT J30a4

Post by Jasonvictory86 »

Hi! I’ve wired in the can harness from hondata and will use a compatible 07 TL ecu.

Is there a starting point / basemap for the J30a4 engine or is it just the J32?

I wanted to ask before I sync the immo to the new ecu. If there’s not a map it’ll take me a weekend to tune it. If there’s a map I can do it on a week night.

Thanks,
- Jason
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
Jasonvictory86
Posts: 39
Joined: Tue Sep 05, 2017 4:20 pm
Location: Dallas, Texas

Re: Starting point for 03-07 Accord v6-6MT J30a4

Post by Jasonvictory86 »

I also have the conversion harness for the ecu from Boomslang. I forgot to mention that.
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Starting point for 03-07 Accord v6-6MT J30a4

Post by KTuner »

A factory starting point is included for tuning purposes.
7thGenLucifer
Posts: 19
Joined: Sun Aug 08, 2021 5:20 pm

Re: Starting point for 03-07 Accord v6-6MT J30a4

Post by 7thGenLucifer »

I have the same engine, the starting point tune isn't far off. I used it and was able to get things lined out in an evening
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Starting point for 03-07 Accord v6-6MT J30a4

Post by KTuner »

7thGenLucifer wrote: Wed Aug 25, 2021 5:15 pm I have the same engine, the starting point tune isn't far off. I used it and was able to get things lined out in an evening
That's good to hear
Post Reply

Return to “07-08 TL Specific”