Page 1 of 1
Injector Swap
Posted: Wed Mar 29, 2017 7:43 am
by MartinT
I intend swapping injectors from the stock 185cc type to Accord model 16450-RCA-A01 270cc injectors. If I adjust the 'Injector Sizing' with Old on 185 and New set to 270, will that perform the scaling required or will I still have to adjust other parameters like the MAF Scaling 'AFM Fuel' scale?
Is the best setting for 'Injector Dead Times' the RC 270cc 16ohm selection?
Re: Injector Swap
Posted: Wed Mar 29, 2017 1:14 pm
by KTuner
That will rescale fueling for you, or you can use the AFM.fuel instead.
Re: Injector Swap
Posted: Wed Mar 29, 2017 1:48 pm
by MartinT
Thanks.
What would be the best injector to select for dead time?
Re: Injector Swap
Posted: Wed Mar 29, 2017 4:31 pm
by KTuner
It'd be best to find the actual accord injector data if possible. What year and model is it from?
Re: Injector Swap
Posted: Thu Mar 30, 2017 6:47 am
by MartinT
Accord 2003-07 3.0l.
Re: Injector Swap
Posted: Thu Mar 30, 2017 2:29 pm
by KTuner
We don't support that model, so I don't have them on hand.
Re: Injector Swap
Posted: Thu Mar 30, 2017 2:54 pm
by MartinT
Ok thanks, I'll stick to the nearest equivalent 270cc settings then.