Injector Swap

Post Reply
MartinT
Posts: 11
Joined: Thu May 05, 2016 5:38 pm

Injector Swap

Post by MartinT »

I intend swapping injectors from the stock 185cc type to Accord model 16450-RCA-A01 270cc injectors. If I adjust the 'Injector Sizing' with Old on 185 and New set to 270, will that perform the scaling required or will I still have to adjust other parameters like the MAF Scaling 'AFM Fuel' scale?

Is the best setting for 'Injector Dead Times' the RC 270cc 16ohm selection?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Injector Swap

Post by KTuner »

That will rescale fueling for you, or you can use the AFM.fuel instead.
MartinT
Posts: 11
Joined: Thu May 05, 2016 5:38 pm

Re: Injector Swap

Post by MartinT »

Thanks.

What would be the best injector to select for dead time?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Injector Swap

Post by KTuner »

It'd be best to find the actual accord injector data if possible. What year and model is it from?
MartinT
Posts: 11
Joined: Thu May 05, 2016 5:38 pm

Re: Injector Swap

Post by MartinT »

Accord 2003-07 3.0l.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Injector Swap

Post by KTuner »

We don't support that model, so I don't have them on hand.
MartinT
Posts: 11
Joined: Thu May 05, 2016 5:38 pm

Re: Injector Swap

Post by MartinT »

Ok thanks, I'll stick to the nearest equivalent 270cc settings then.
Post Reply

Return to “13-15 CR-Z Specific”