it's actually at 0.37V (7.5% absolute throttle position) when closed and sometimes I get TPS error codes.KTuner wrote:If the TPS value didn't change when you hit Calibrate 0 then your TPS is way out of spec. You'll need to adjust it physically.
nevertheless, I've tried to play with throttle, opening it slightly to several percents, and clicked those buttons at the same time and nothing changed at all.
it would be great to have an option to set minimum and maximum TPS readings and rescale TPS sensor value accordingly.
by the way, why KTuner board resets the ECU every time I switch the ignition off, deleting any error codes, etc?
When I remove the board, all works fine, with it inside it doesn't have DTC memory at all.
thank you, waiting for a reply.