Page 1 of 1
Fuel corrections
Posted: Sat Mar 28, 2020 10:23 pm
by TJ4295
I’m not able to access the fuel corrections tab in the drop down menus. I assume this is where you adjust the fuel output? I’ve made changes to both the WOT enrichment and cat heating tables and haven’t seen any changes. Am I missing something, or is that not a supported feature for this platform? I looked and the list on the ktuner homepage, but I would assume fuel corrections would fall under the “ignition/fuel tuning” which was marked.
Re: Fuel corrections
Posted: Sun Mar 29, 2020 5:51 am
by Linszter
TJ4295 wrote:I’m not able to access the fuel corrections tab in the drop down menus. I assume this is where you adjust the fuel output? I’ve made changes to both the WOT enrichment and cat heating tables and haven’t seen any changes. Am I missing something, or is that not a supported feature for this platform? I looked and the list on the ktuner homepage, but I would assume fuel corrections would fall under the “ignition/fuel tuning” which was marked.
Fuel correction is not available on initial support. MAF is where you can adjust the fuel.
Re: Fuel corrections
Posted: Sun Mar 29, 2020 12:39 pm
by KTuner
The MAF curve, MAF.Fuel, and WOT enrichments are what control fueling. MAF applications do not have IAT fuel corrections.
Re: Fuel corrections
Posted: Sun Mar 29, 2020 9:21 pm
by TJ4295
Ahhhhh. That answers it. Awesome, I appreciate it!
Re: Fuel corrections
Posted: Mon Mar 30, 2020 1:41 pm
by KTuner
No problem!