Reverse Lockout

bianyy
Posts: 42
Joined: Thu Oct 29, 2015 3:00 am

Reverse Lockout

Post by bianyy »

Hello Ktuner

I have 07 TSX AT, will Ktuner for 0708 tsx end user system activate Reverse Lockout for the purpose to do an AT to MT swap? As I can't find a MT ecu in market.

Cheers!

Bian.YY
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Reverse Lockout

Post by KTuner »

I have not attempted that, but will see if I can setup a test to check.
bianyy
Posts: 42
Joined: Thu Oct 29, 2015 3:00 am

Re: Reverse Lockout

Post by bianyy »

KTuner wrote:I have not attempted that, but will see if I can setup a test to check.
Do you have any updates?
bianyy
Posts: 42
Joined: Thu Oct 29, 2015 3:00 am

Re: Reverse Lockout

Post by bianyy »

Hello Ktuner

Do you have any updates on this topic?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Reverse Lockout

Post by KTuner »

There are currently no updates.
bianyy
Posts: 42
Joined: Thu Oct 29, 2015 3:00 am

Re: Reverse Lockout

Post by bianyy »

Hi Ktuner

I have additional question about TSX0708.

I had my hybrid setup done, I'm from China market. I have CM5 (originally K24A8 DBW) accord chassis plus K24A2 and TSX08 AT ECU, I have CAN bus extend to my DLC and make ECU and immobilizer paired, the car is now recognized as a TSX by HONDA Diagnostic Tool, the car is working with some DTCs as below:

a. ECT SENSOR 2 CIRCUIT HIGH VOLTAGE
b.EVAP CVS CIRCUIT VOLTAGE LOW
c.EVAP FTP SENSOR HIGH INPUT

I'm quite sure my car dosen't have ECT sensor 2 on radiator, it's a fun switch.
I'm quite sure my car doesn't have EVAP circuit, it's only a 1 to 2 pipe junction style setup, no electronics control
I'm quite sure my car dosen't have FTP sensor, as no EVAP circuit.

I'm going to consider if Ktuner for 0708 ecu end user can disable all of these DTCs? Be honest I'm comparing between Ktuner and another your competitor brand as you know, I know that product can disable all of these and make the car runs without DTCs. I downloaded and saw the software interface of another brand. But I can't run Ktuner software on my laptop, I guess Ktuner software needs Ktuner hardware for running? I downloaded Ktuner software and installed, but I can't run the application without any prompt.

Bian.YY
Cheers!
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Reverse Lockout

Post by KTuner »

Currently only ECT2 can be disabled. I'd need to find the other two.
bianyy
Posts: 42
Joined: Thu Oct 29, 2015 3:00 am

Re: Reverse Lockout

Post by bianyy »

In the other thead you telled for 07accord all these options can be disabled,from mu understand tsx shou be quite similar.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Reverse Lockout

Post by KTuner »

Every ECU has a different codebase.
bianyy
Posts: 42
Joined: Thu Oct 29, 2015 3:00 am

Re: Reverse Lockout

Post by bianyy »

Do you have any update?
Post Reply

Return to “07-08 TSX Specific”