Installed Cams Now Misfired At Idle

Post Reply
Minnahc
Posts: 2
Joined: Fri Sep 02, 2022 4:55 am

Installed Cams Now Misfired At Idle

Post by Minnahc »

Hello I have a 12.1.0 CP 2013 Honda Accord V6 MT. Had it tuned with just high compression pistons and flat valves made 304whp. Now I just installed cams it misfires still idle until a couple of minutes it runs on limp mode with CEL flashing and doesn’t misfire. AFR runs at 14.7 at 750 rpm and when CEL flashes and runs on limp mode AFR runs on 16.5 and revs at 1200 rpm. I’ve tired to take 30% of fuel at idle/ cruse tables also added 30% to the throttle air flow. Doesn’t seem to help. Any help with be great thanks. Just trying to have it idle without any misfires. Thank you in advance.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Installed Cams Now Misfired At Idle

Post by KTuner »

Have you looked around the software for options related to Misfire?
Minnahc
Posts: 2
Joined: Fri Sep 02, 2022 4:55 am

Re: Installed Cams Now Misfired At Idle

Post by Minnahc »

I have not I didn’t know that there is an option for that.
Post Reply

Return to “13-17 Accord V6 Specific”