K.con question ❓

[Arturo785]

Hi everyone, so just bought my ktuner and connected it onto my 2013 Accord V6 coupe, all good but since I locked the unit into the car and checked the K.con value it had really low lectures and I thought it would change when applying a tune.
The tune I applied was the 91+ with VCM delete and improved shifting however I still see this weirdly low values

Did a quick run with the car after installing the tune and never felt any issuen such as vibration, check engines lights or lost any power when accelerating, also idle felt smooth as always.

What may be wrong with my car? Or maybe with my knock sensor

For example k.con = 0.05 or k.con = 0.13

[KTuner]

There's nothing weird about the values and it's running well, according to what you said, so I don't understand the entire premise of the question.

[Arturo785]

Well I had that question because all the posts and videos I saw mentioned that the lowest number possible for k.con was about 0.49 and I thought there was something wrong with my sensor but that was all.
Thanks a lot for the reply

[KTuner]

If you look at those videos again you'll notice it's not likely a 13-17 Accord V6 they're referring to.