O2 Sensor Data

Post Reply
MeeSeek
Posts: 7
Joined: Fri May 01, 2020 12:50 am

O2 Sensor Data

Post by MeeSeek »

Is there a way Ktuner V2 can help me view my engine's O2 Sensor voltage data?

I dont see any options on the V2 interface and Im not seeing that data collected in my logs.

Would anyone be able to help me figure my O2 sensor voltage readings on my wideband sensors with KTuner V2?

Thanks
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: O2 Sensor Data

Post by KTuner »

We allow you to monitor Wideband O2 data. Voltage isn't relevant data for those sensors.
MeeSeek
Posts: 7
Joined: Fri May 01, 2020 12:50 am

Re: O2 Sensor Data

Post by MeeSeek »

Would you be able to release and update to provide the O2 Sensor voltage reads?

Thats how the ECU is monitoring post-combustion fuel trims, not through AFR values.

It would be helpful to know the O2 Sensor reads to ensure they are working properly.
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: O2 Sensor Data

Post by KTuner »

I think you're confused. Wideband O2 sensors measure current, not voltage, so once again that information is not relevant for usage. The ECU uses AFR from these Wideband sensors for feedback.

If you're referring to the rear O2s, we have no interest in those.
Post Reply

Return to “08-12 Accord V6 Specific”