Tuning Tables not changing

Post Reply
TSpiv
Posts: 3
Joined: Fri Nov 15, 2019 1:54 am

Tuning Tables not changing

Post by TSpiv »

So I just received my ktuner 1.2 and I've been looking at the tuning Tables for the different maps. The problem is all the maps have the same numbers. This can't be correct. Did I mess up the install or something? Here's a picture of the numbers from the table which is the same for every tune/map. https://imgur.com/a/g7CJ0qz
Linszter
Posts: 99
Joined: Thu Mar 17, 2016 11:27 am
Location: Hungary
Contact:

Re: Tuning Tables not changing

Post by Linszter »

TSpiv wrote:So I just received my ktuner 1.2 and I've been looking at the tuning Tables for the different maps. The problem is all the maps have the same numbers. This can't be correct. Did I mess up the install or something? Here's a picture of the numbers from the table which is the same for every tune/map. https://imgur.com/a/g7CJ0qz
Check the boost target tables.
TSpiv
Posts: 3
Joined: Fri Nov 15, 2019 1:54 am

Re: Tuning Tables not changing

Post by TSpiv »

Check the boost target tables.[/quote]
There are no boost target tables as my car is NA
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Tuning Tables not changing

Post by KTuner »

The tune files do have differences. Just like we've mentioned to you on the phone, if you're focused on one type of map try comparing all of them instead.
Linszter
Posts: 99
Joined: Thu Mar 17, 2016 11:27 am
Location: Hungary
Contact:

Re: Tuning Tables not changing

Post by Linszter »

TSpiv wrote:Check the boost target tables.
There are no boost target tables as my car is NA[/quote]

Sorry I forgot to check the topic. :D As KTuner mentioned, check all other tables and parameters.
Post Reply

Return to “08-12 Accord V6 Specific”