1000cc Injectors

rulgzz
Posts: 2
Joined: Tue Oct 31, 2017 1:29 am

Re: 1000cc Injectors

Post by rulgzz »

KTuner wrote:You have access to the MAF table and WOT enrichment tables to adjust fueling as necessary. You can use individual cylinder trims to compensate for the injector sizing, if you see these settings and feel so inclined. You will be severely limited tuning this on MAF. This ECU was only slated for an NA support release. Who knows what the future may see.
What about ignition timing? I can't see boost values in the ignition tables
KTuner
Site Admin
Posts: 3050
Joined: Mon Jul 22, 2013 8:13 pm

Re: 1000cc Injectors

Post by KTuner »

We don't support forced induction on that ECU.
KTuner
Site Admin
Posts: 3050
Joined: Mon Jul 22, 2013 8:13 pm

Re: 1000cc Injectors

Post by KTuner »

We have a forced induction test version coming for this ECU.
Mattyb
Posts: 2
Joined: Fri Nov 30, 2018 8:48 am

Re: 1000cc Injectors

Post by Mattyb »

rulgzz wrote:I'm on the same boat here: RX0-K31 ECU :(
Im just about to tune my newly turbod civic si. Rushing home after work to check what my ecu part number is, im not sure i checked mine before my purchase, as it seems a standard 9th gen si May i ask what this ecu is in?
Post Reply

Return to “12-15 Civic Si Specific”