ECU Stop after full reflash
Posted: Wed Oct 11, 2017 10:58 am
Guys,
Im working on a 2.4 Civic Si. And after some hard Work ive stuck with three main issues:
* Correct parameter for VTEC engagement window (Vtec light is blinking and not keep engage)
* The ECU just HALT ... stop working, im not certain about wht ... Theoretcaly looks by lean burn, but, im not sure if it is
* There's a way I can overlay the STFT and the Fuel tables io to do the PT corrections on Ktuner Software?
Attached both calibration and Datalog. Im really lost with it,
Thanks for your support.
Im working on a 2.4 Civic Si. And after some hard Work ive stuck with three main issues:
* Correct parameter for VTEC engagement window (Vtec light is blinking and not keep engage)
* The ECU just HALT ... stop working, im not certain about wht ... Theoretcaly looks by lean burn, but, im not sure if it is
* There's a way I can overlay the STFT and the Fuel tables io to do the PT corrections on Ktuner Software?
Attached both calibration and Datalog. Im really lost with it,
Thanks for your support.