ECU Stop after full reflash

Post Reply
aputada
Posts: 2
Joined: Wed Oct 11, 2017 10:48 am

ECU Stop after full reflash

Post by aputada »

Guys,

Im working on a 2.4 Civic Si. And after some hard Work ive stuck with three main issues:

* Correct parameter for VTEC engagement window (Vtec light is blinking and not keep engage)
* The ECU just HALT ... stop working, im not certain about wht ... Theoretcaly looks by lean burn, but, im not sure if it is
* There's a way I can overlay the STFT and the Fuel tables io to do the PT corrections on Ktuner Software?

Attached both calibration and Datalog. Im really lost with it,

Thanks for your support.
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: ECU Stop after full reflash

Post by KTuner »

You may want to email. Unfortunately I'm not following what you mean about ECU stop and there's no files attached.
aputada
Posts: 2
Joined: Wed Oct 11, 2017 10:48 am

Re: ECU Stop after full reflash

Post by aputada »

I Tried to Attach both calibration and Datalog, but without success.

I'll email it for you guys.

Thanks
Post Reply

Return to “12-15 Civic Si Specific”