CEL P325 ECT2 error

Post Reply
oja
Posts: 17
Joined: Mon Apr 03, 2017 4:52 am

CEL P325 ECT2 error

Post by oja »

Has there been any new news on a fix for the P325 error that comes on to what i beleive is a discrepencie against the two coolant sensors showing differently during warmup. < because one is reading actual water temp and one is re routed for i cant remember which is which but its either EBC or ethanol converter.

During a log my ECT2 iirc always reads 32 or something like that atleast during idle i know. Everything is working correctly as far as the re pinning ebc a ethanol just my ecu keeps popping the code during warmup. I saw u added ect2 to the newest firmware update so wondering if its still getting looked at?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: CEL P325 ECT2 error

Post by KTuner »

When ECT2 is disabled it's unused. If you look up P325 it has nothing to do with ECT.
oja
Posts: 17
Joined: Mon Apr 03, 2017 4:52 am

Re: CEL P325 ECT2 error

Post by oja »

My apologies its P0128 which did not come on until I had finished the repining. I couldn't chalk it up as a coincidence because when I finished it immediately started popping. Any thoughts?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: CEL P325 ECT2 error

Post by KTuner »

Update your software. The last version has a P0128 fix, as stated in the version history.
oja
Posts: 17
Joined: Mon Apr 03, 2017 4:52 am

Re: CEL P325 ECT2 error

Post by oja »

Thank you!
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: CEL P325 ECT2 error

Post by KTuner »

No problem.
Post Reply

Return to “06-09 S2000 Specific”