Tuning for boost/MAP sensor support

[blueshark]

I have a 2009 Accord with a k24z3/5 speed and am currently in the process of building up an engine for boost. I currently have a short block built and am in the process of building the turbo setup and am looking to run about 15psi of boost, which from my understanding is hard to tune(or outright doesnt work on one build forum I was reading) with a blow-through setup using the MAF after 8psi, and it can be unreliable with faulty readings. I was wondering if there is or will be support for expandable boost tables and aftermarket MAP sensor support for this generation. I have asked around on other forums and was given mixed answers so I figured I would ask here to get a direct answer. On the EndlessRPM website, it lists that the two functions/features are currently in beta but that does not match the official website.

[KTuner]

Speed Density tuning is not an option on this platform. MAF would need to be setup properly for the additional flow and calibrated accordingly.