KTuner In-ECU communication failure

Questions about software installation and registration
Post Reply
ume
Posts: 2
Joined: Mon Nov 18, 2019 9:00 pm

KTuner In-ECU communication failure

Post by ume »

K-Tuner, but I can't connect anything. I was able to connect for the first three times and reflash, but suddenly I couldn't connect. I did recover ecu and reinstalled the software, but the communication failure pop-up appears no matter how many times I do it. Is it faulty? Is there a solution?

The url of the video
https://youtu.be/UuXb4bzU-fM
KTuner
Site Admin
Posts: 3741
Joined: Mon Jul 22, 2013 8:13 pm

Re: KTuner In-ECU communication failure

Post by KTuner »

Power down fully and check the LED status. Contact support via email for anything further.
yasuaki
Posts: 1
Joined: Mon Apr 15, 2019 3:53 am

Re: KTuner In-ECU communication failure

Post by yasuaki »

LED status is Red1 steady,Green4 blinking slowly.

Car:2005y Honda Accord Euro-R CL7
ECU:K-Tuner Complete Engine Management System (w/ Refurbished ECU) - Honda Accord CL7 (Incl. Euro-R) by H-TUNE
37820-RAD
https://h-tune.co.uk/k-tuner-complete-e ... o-r-cable/
KTuner
Site Admin
Posts: 3741
Joined: Mon Jul 22, 2013 8:13 pm

Re: KTuner In-ECU communication failure

Post by KTuner »

We outline what the LEDs mean in the help.

See http://ktuner.com/KTunerHelp/hardware_status_leds.htm
ume
Posts: 2
Joined: Mon Nov 18, 2019 9:00 pm

Re: KTuner In-ECU communication failure

Post by ume »

KTuner wrote:We outline what the LEDs mean in the help.

See http://ktuner.com/KTunerHelp/hardware_status_leds.htm
I know that. I want to know how to recover from there.
KTuner
Site Admin
Posts: 3741
Joined: Mon Jul 22, 2013 8:13 pm

Re: KTuner In-ECU communication failure

Post by KTuner »

That means it's not communicating with the ECU either because of the installation or ECU itself.
Post Reply

Return to “KTuner Software Installation”