I've got a 2006 6MT with the '07 AT ECU.
I also have an MDX throttle body among other mods. The MDX throttle body is 68mm in and 64mm out which is 8mm bigger in.
My logs show my TPS actual is 105.7% when the Command is 100%.
Is there a way to re-calibrate this within Ktuner? I have already done the idle relearn through my Honda HDS.
I'm not having any issues with idle or performance. Just through I'd ask if this would cause a problem.
Thanks,
- Jason
2006 - TPS says 105.7%
-
- Posts: 39
- Joined: Tue Sep 05, 2017 4:20 pm
- Location: Dallas, Texas
2006 - TPS says 105.7%
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
Re: 2006 - TPS says 105.7%
Seeing anywhere up to 120% is standard on the Honda/Acura drive by wire platforms. This is their calculation and there is no reason to change it.
-
- Posts: 39
- Joined: Tue Sep 05, 2017 4:20 pm
- Location: Dallas, Texas
Re: 2006 - TPS says 105.7%
Okie dokie. Just wanted to check. Thanks for the quick reply!
PS...... I love my V2. Super cool!
PS...... I love my V2. Super cool!
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness