Boosted using a TSX ecu

Kfiero1985
Posts: 9
Joined: Mon Aug 01, 2022 7:00 am

Re: Boosted using a TSX ecu

Post by Kfiero1985 »

Does this ecu have flex fuel support? Looking at potentially switching to e85 and just want to make sure before I buy the flex fuel converter. Have been driving my booster k24 swap and it feels great, even with the limited options of this ecu when it comes to boost control.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Boosted using a TSX ecu

Post by KTuner »

It does not.

Glad it's working out so far for you!
Kfiero1985
Posts: 9
Joined: Mon Aug 01, 2022 7:00 am

Re: Boosted using a TSX ecu

Post by Kfiero1985 »

Can you turn off the vtec oil pressure switch? I have it wired currently to my vtec solenoid wire since I have the Jdm spool valve. It’s been causing issues and I’d like to just have the one wire and one pin instead of merging 2 pins to 1 wire.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Boosted using a TSX ecu

Post by KTuner »

I'm assuming you do not have this ECU still?
Kfiero1985
Posts: 9
Joined: Mon Aug 01, 2022 7:00 am

Re: Boosted using a TSX ecu

Post by Kfiero1985 »

I still have the k tuner 04-06 TSX ecu, still runs great minus my vtec issue.
Kfiero1985
Posts: 9
Joined: Mon Aug 01, 2022 7:00 am

Re: Boosted using a TSX ecu

Post by Kfiero1985 »

I’ve been looking through the disable menu and I don’t see it, unless I’ve been over looking it.
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Boosted using a TSX ecu

Post by KTuner »

VTP means VTEC Pressure.
Post Reply

Return to “04-06 TSX / Euro CL9 Specific”