Ktuner rev1 WMI

Post Reply
Kolio
Posts: 6
Joined: Fri Aug 20, 2021 8:09 pm

Ktuner rev1 WMI

Post by Kolio »

Hello,can I control WMI with the ktuner rev1?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ktuner rev1 WMI

Post by KTuner »

I'm a programmer. WMI means Windows Management Instrumentation to me. That does not relate to the R1, as it's part of the software.
Kolio
Posts: 6
Joined: Fri Aug 20, 2021 8:09 pm

Re: Ktuner rev1 WMI

Post by Kolio »

Sorry,I mean water methanol injection.I can't find information about that.I know r1 board cant control pwm,that is one option,the other option is "Stage 3+ ECU: The kit is controlled via a Standalone ECU. You can program the system based on TPS, MAP, or Engine Load. The flow can be a single-stage injection."
Last edited by Kolio on Fri Aug 20, 2021 9:01 pm, edited 1 time in total.
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ktuner rev1 WMI

Post by KTuner »

Only the SWAP application using the PRB codebase has customizable outputs. That won't work for the TSX.
Kolio
Posts: 6
Joined: Fri Aug 20, 2021 8:09 pm

Re: Ktuner rev1 WMI

Post by Kolio »

Okay, that's what I wanted to know, thanks.
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ktuner rev1 WMI

Post by KTuner »

No problem
Post Reply

Return to “04-06 TSX / Euro CL9 Specific”