2004 TSX K24A2 SWAP which ecu?

Post Reply
doormat
Posts: 1
Joined: Sun Oct 04, 2015 4:05 am

2004 TSX K24A2 SWAP which ecu?

Post by doormat »

Hello I'm putting a 2004 TSX K24A2 into a 1985 toyota pickup. Since I cannot use the TSX ecu what ecu should I buy, and what wiring harness? I can get the AT TSX engine harness for dirt cheap. Is it compatible with an ECU that can be ktunered? I have no problem modifying harnesses a bit.

Thanks
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: 2004 TSX K24A2 SWAP which ecu?

Post by KTuner »

If you plan to install and keep the drive by wire setup then you can use our TSX ECU for that. TSX harness should be fine. The AT may need some modification.

If you plan on losing drive by wire and using cable throttle instead then you can use our swap ECU. You'd want to use an RSX or Element harness in this case.
Post Reply

Return to “04-06 TSX / Euro CL9 Specific”