K24/K20 Frank basemap

Post Reply
Lorybee
Posts: 7
Joined: Wed Jul 29, 2015 11:15 pm

K24/K20 Frank basemap

Post by Lorybee »

Hi

I am new to the forum so as i am new using ktuner. I have a 2004 euro cl9 accord with stock bottom k24a3 engine with k20a ported head, dc5 cams, double springs, 550cc injectors, PRC manifold with modded oem typeS DBW tb, obx 421 header, 4.5kg lightweight flywheel, stage 2 clutch, dc5 oil pump and sump, k&n cai.
Can someone help me providing me with a basemap i could start the programming with? Thanks a lot in advance.
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: K24/K20 Frank basemap

Post by KTuner »

You will want to start with one of the TSX basemaps and modify to fit your setup in order to get it started. Then tuning or an e-tuner will be required.
Lorybee
Posts: 7
Joined: Wed Jul 29, 2015 11:15 pm

Re: K24/K20 Frank basemap

Post by Lorybee »

Where can i get an appropiate basemap which suits roughly my setup? Obviously i need to tune that basemap i know, is there anyone who could help me with that? How can you tune online without knowing how the car reacts for certain changes?
Lorybee
Posts: 7
Joined: Wed Jul 29, 2015 11:15 pm

Re: K24/K20 Frank basemap

Post by Lorybee »

Also could you tell me which tsx ecu codes are compatible with my manual cl9 and the end user ktuner board i have? I had a cable ecu wrongly so now i need to get a new one but id dont know which one and want to make sure at this time. ( I have very good soldering skills and professional soldering equipment)
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: K24/K20 Frank basemap

Post by KTuner »

The included basemaps are the only ones to start from unless you get one directly from a tuner you're dealing with. VitTuned.com and TurbogixxerTuning.com offer e-tuning services.

You want a KTuner TSX ECU or 06-07 Accord AT. You'll need to unlock your end user unit from the current ECU before you'll be able to use it with a different one.
Lorybee
Posts: 7
Joined: Wed Jul 29, 2015 11:15 pm

Re: K24/K20 Frank basemap

Post by Lorybee »

I didnt install the board to any ECU yet. I dont unserstand this unlocking thing you said. My car is manual are you sure i need a 06-07 auto tsx ecu? 05 is not supported?
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: K24/K20 Frank basemap

Post by KTuner »

Oh good. A board is locked to an ECU. In order to move it to another ECU or resell the board you need to flash the ECU back to stock and unlock the board.

Sorry that wording must need changed since your TSX is called an Accord... A KTuner TSX ECU (Not a standard TSX ECU or CL9 ECU) or an 06-07 USDM Accord AT ECU.
Lorybee
Posts: 7
Joined: Wed Jul 29, 2015 11:15 pm

Re: K24/K20 Frank basemap

Post by Lorybee »

Do i have to modify anything on that ecu before soldering the board into it? When i download and install the ktuner software will it have the tsx basemap included?
Lorybee
Posts: 7
Joined: Wed Jul 29, 2015 11:15 pm

Re: K24/K20 Frank basemap

Post by Lorybee »

Will that work for my car then 100%? Thats for DBW right?

http://www.ebay.com/itm/2006-06-2007-07 ... 0891313535
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: K24/K20 Frank basemap

Post by KTuner »

06-07 Accord AT, yes.
Post Reply

Return to “04-06 TSX / Euro CL9 Specific”