Page 1 of 1
aem af gauge and sensor
Posted: Sun Feb 27, 2022 11:48 pm
by 82dewey
So now that we have things working, i want the ecu to read and log the aem guage and sensor. How would they be hooked up???? We got this and want it to help make sure we are good. This way if the tune needs adjustments, it can be done..
Please and thank you.
Re: aem af gauge and sensor
Posted: Mon Feb 28, 2022 1:52 pm
by KTuner
There are several analog inputs to choose from in the wideband preferences where you can also setup the bounds for the sensor.
Re: aem af gauge and sensor
Posted: Mon Feb 28, 2022 3:25 pm
by 82dewey
ok. i was not sure if attaching it to something on the harness to a pin for the ecu would be best or what. If the ecu/tune is able to read it and make sure it dont go past 14.5/7 for af.
Guess ill have to find what and where on the board we can hook it to to help read it and all.
Re: aem af gauge and sensor
Posted: Mon Feb 28, 2022 5:34 pm
by KTuner
The ECU would use a factory sensor to make its adjustments. You can monitor an external sensor via those settings in preferences.