TPS read during logging

Civic/Integra/etc with a K swap
Post Reply
nylumiro24
Posts: 13
Joined: Tue Apr 21, 2020 2:33 am

TPS read during logging

Post by nylumiro24 »

Good evening, I have recently replaced my OEM TPS for an Acuity, reason being was because at WOT the OEM only read to 81%. Even after adjustment on the software. So, I replaced it thinking it was bad.

Now, the Acuity is doing the same. I manually adjusted it using my voltmeter and their instructions, and verified on the software. at 0% throttle, software displays just that, 0%. At Full throttle it does not go pass 81%. The butterfly is all the way open when the pedal is fully depressed.

Is there something I am doing wrong? Or is the software limited to that 81%?

Thank you in advance!!!
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: TPS read during logging

Post by KTuner »

That's a normal reading for those years. Nothing to do with the software.
nylumiro24
Posts: 13
Joined: Tue Apr 21, 2020 2:33 am

Re: TPS read during logging

Post by nylumiro24 »

KTuner wrote: Tue Jun 15, 2021 12:01 pm That's a normal reading for those years. Nothing to do with the software.
Ok. Awesome. Then I am good to go.




Anyone want to buy a perfectly fine and working OEM TPS? 🤣
Post Reply

Return to “K Swapped Vehicles”