K24a8 ek

Civic/Integra/etc with a K swap
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: K24a8 ek

Post by KTuner »

No problem
Donnycr
Posts: 14
Joined: Mon Aug 17, 2020 9:30 pm

Re: K24a8 ek

Post by Donnycr »

So I can't get my car to start got everything on and plugged in but I got a code says internal control module keep memory alive Kam error
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: K24a8 ek

Post by KTuner »

KAM error doesn't prevent startup and may mean you didn't wire that correctly.
Donnycr
Posts: 14
Joined: Mon Aug 17, 2020 9:30 pm

Re: K24a8 ek

Post by Donnycr »

I got everything figured out but car still won't fire up Kam is gone only few other codes left but easy fix and still won't fire. This is my first time using ktuner so I'm a newbie with it
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: K24a8 ek

Post by KTuner »

If you're able to datalog and have immobilizer disabled it is likely something in the wiring. You can verify sensor data looks nominal in datalogging to see if any sensors have failed, too.
Donnycr
Posts: 14
Joined: Mon Aug 17, 2020 9:30 pm

Re: K24a8 ek

Post by Donnycr »

So question since I got the 05 06 rsx ecu and running a k20z engine harness would that be a problem?
Donnycr
Posts: 14
Joined: Mon Aug 17, 2020 9:30 pm

Re: K24a8 ek

Post by Donnycr »

I guess I needed the jumper u guys sell to work with 05 06 ecu
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: K24a8 ek

Post by KTuner »

If you have an 05-06 harness and ECU you don't need a jumper.
Donnycr
Posts: 14
Joined: Mon Aug 17, 2020 9:30 pm

Re: K24a8 ek

Post by Donnycr »

I do not I have a ep3 harness and it's the same as 02 rsx
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: K24a8 ek

Post by KTuner »

Donnycr wrote: Fri May 07, 2021 1:30 am So question since I got the 05 06 rsx ecu and running a k20z engine harness would that be a problem?
Going by what you said, a K20Z harness is an 05-06. If you have an 02-04 harness then the details on the page specifically say you need a conversion harness. An EP3 is a K20a3.
Post Reply

Return to “K Swapped Vehicles”