K20 Euro TypeR CL7 Swap on EK

Civic/Integra/etc with a K swap
Post Reply
demzgarage
Posts: 8
Joined: Mon Oct 19, 2020 2:10 am

K20 Euro TypeR CL7 Swap on EK

Post by demzgarage »

I Need Help!

Im doing a K20 Euro TypeR CL7 on my EK, eveything is all wired and connected. Now Im trying to start the car using a KTUNER RAD 03-05 ECU, since i used the CL7 harness that came with the engine, I tried loading different layouts and disabbling immobilizer, I still cant get the car to start! Any useful inputs I might have missed? TIA

My setup

Ktuner Revision 1 ECU / RAD 03-05
K20 Euro CL7
CL7 Harness
EK9 Type R Fuel Pump
Main Relay wired but not 100% since I cant find a ECU diagram for CL7 or RBC ECU, I just followed the stock ECU Pinouts on the CL7
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: K20 Euro TypeR CL7 Swap on EK

Post by KTuner »

No suggestions, as it sounds like our part of this kit is working just fine for you. If you can datalog real-time data look for sensors that aren't responding properly. You're using a drive by cable ECU so ensure that's what the harness is setup for.
demzgarage
Posts: 8
Joined: Mon Oct 19, 2020 2:10 am

Re: K20 Euro TypeR CL7 Swap on EK

Post by demzgarage »

The fuel pump is just priming, and the injectors and coils have no power! Earth is good, I might have missed a few wires..

Can you guys send me a pinout for the A connector, i've been searching for ages and no luck!

Also what are the jumper cables for that came in the ktuner box?

https://i.ibb.co/9y2W4Lf/122824302-3591 ... 6169-n.jpg

https://i.ibb.co/NY8v4Z6/122396346-5003 ... 5280-n.jpg

Help is badly needed to run this motor using KTuner! any help especially the ECU pinout for the RAD ECU would be a game changer
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: K20 Euro TypeR CL7 Swap on EK

Post by KTuner »

The RAD pinout is basically the same as 05-06 RSX.
demzgarage
Posts: 8
Joined: Mon Oct 19, 2020 2:10 am

Re: K20 Euro TypeR CL7 Swap on EK

Post by demzgarage »

Found it, no its not the same as 05-06 RSX, different colors on the pinout!

Connector E has the main relay pinout , earth and some pulse!

Car is running just loaded an RSX layout and disabled immobilizer! Car's fuel pump is priming the way it should!

Car started with 1 click, cheers KTuner works great!
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: K20 Euro TypeR CL7 Swap on EK

Post by KTuner »

That's excellent news!
Post Reply

Return to “K Swapped Vehicles”