Page 1 of 1

TPS not reading 100% at WOT?

Posted: Wed Sep 16, 2015 4:19 am
by Audiophyle
At wide open throttle my TPS never exceeds 80%, is this common? I have yet to pop off the intake & see if the butterfly is actually at 100% when the pedal is pressed to the floor, but I wonder if its just a calibration issue.

Re: TPS not reading 100% at WOT?

Posted: Wed Sep 16, 2015 5:02 am
by KTuner
Most cable throttle applications are around 82% from the factory. You'll find closed loop WOT TPS thresholds are set below that for that reason.