TPS readings
TPS readings
I've noticed on all my logs that the TPS reading never gets higher than 82.5%. Should I be seeing 100 at WOT? We adjusted it to get the idle back where it should be but that was before KTuner was installed. Idle is still fine . Anyone?
2006 RSX TYPE S
Injen Shorty OBX V2 Race Header
KTuner ,JRSC Innovative mounts
MUGEN repro lips, Weathertech window visors
Racelands, rear camber kits, Beaks
Stock powder coated,spacers
JJ center
Autopage 915 w/ C-3. B&M Short shifter,
Injen Shorty OBX V2 Race Header
KTuner ,JRSC Innovative mounts
MUGEN repro lips, Weathertech window visors
Racelands, rear camber kits, Beaks
Stock powder coated,spacers
JJ center
Autopage 915 w/ C-3. B&M Short shifter,
Re: TPS readings
~80 is normal. I'll likely have an option so you can set the spread and have it read 100 there.
Re: TPS readings
Even on my stock RSX when i used my scan tool it never read 100% at wot, the most was 92.5%.
Re: TPS readings
I test a fully stock RSX K20z1
the TPS closed is a 9%
TPS fully open is 93%
the TPS closed is a 9%
TPS fully open is 93%
Ktuner Authorized Tuner
Precisionautocanada.com
Precisionautocanada.com
Re: TPS readings
Garrett wrote:I test a fully stock RSX K20z1
the TPS closed is a 9%
TPS fully open is 93%
So key on , car not started .. 9% or are you talking at idle, car warmed up...
I had to drill out the stock "rivets" in order to adjust it. I just stopped when the idle was corrected. Before I did that it seemed to hunt for steady idle . Thanks for the replies...
2006 RSX TYPE S
Injen Shorty OBX V2 Race Header
KTuner ,JRSC Innovative mounts
MUGEN repro lips, Weathertech window visors
Racelands, rear camber kits, Beaks
Stock powder coated,spacers
JJ center
Autopage 915 w/ C-3. B&M Short shifter,
Injen Shorty OBX V2 Race Header
KTuner ,JRSC Innovative mounts
MUGEN repro lips, Weathertech window visors
Racelands, rear camber kits, Beaks
Stock powder coated,spacers
JJ center
Autopage 915 w/ C-3. B&M Short shifter,
Re: TPS readings
KTuner wrote:~80 is normal. I'll likely have an option so you can set the spread and have it read 100 there.
Cool! Thanks...
2006 RSX TYPE S
Injen Shorty OBX V2 Race Header
KTuner ,JRSC Innovative mounts
MUGEN repro lips, Weathertech window visors
Racelands, rear camber kits, Beaks
Stock powder coated,spacers
JJ center
Autopage 915 w/ C-3. B&M Short shifter,
Injen Shorty OBX V2 Race Header
KTuner ,JRSC Innovative mounts
MUGEN repro lips, Weathertech window visors
Racelands, rear camber kits, Beaks
Stock powder coated,spacers
JJ center
Autopage 915 w/ C-3. B&M Short shifter,
Re: TPS readings
Lol, gonna shorten up this SIG, scrolling forever on my iphone to read a damn post or reply....
2006 RSX TYPE S
Injen Shorty OBX V2 Race Header
KTuner ,JRSC Innovative mounts
MUGEN repro lips, Weathertech window visors
Racelands, rear camber kits, Beaks
Stock powder coated,spacers
JJ center
Autopage 915 w/ C-3. B&M Short shifter,
Injen Shorty OBX V2 Race Header
KTuner ,JRSC Innovative mounts
MUGEN repro lips, Weathertech window visors
Racelands, rear camber kits, Beaks
Stock powder coated,spacers
JJ center
Autopage 915 w/ C-3. B&M Short shifter,
Re: TPS readings
That will cause idle issues. It should be 0 or very close to 0 at close in the KTuner software.Garrett wrote:I test a fully stock RSX K20z1
the TPS closed is a 9%
TPS fully open is 93%
Re: TPS readings
so I need to move the TPS itseft since we don't have ajustement value in the softwareKTuner wrote:That will cause idle issues. It should be 0 or very close to 0 at close in the KTuner software.Garrett wrote:I test a fully stock RSX K20z1
the TPS closed is a 9%
TPS fully open is 93%
Ktuner Authorized Tuner
Precisionautocanada.com
Precisionautocanada.com
Re: TPS readings
Factory shouldn't need adjustment like that. I wonder what happened.