Page 3 of 3
Re: System AFR values when in high cam
Posted: Tue Sep 13, 2022 12:11 am
by husseinholland
Thank you - yes, I see it in the list. The values don't jive with the WBO2 controller, so I will have to review the table I used, it came with the controller, but something has to be wrong.
Re: System AFR values when in high cam
Posted: Tue Nov 28, 2023 2:31 am
by husseinholland
KTuner wrote: ↑Fri Sep 02, 2022 11:36 am
There is a gauge for ELD Input as well.
Hello again
I'd like to re-position my WBO2 input to use the gauge available in the ELD input. I can move my WBO2 signal from Ptank to ELD easily enough, what I can't find its where I disable the ELD, since I will be disconnecting the existing ELD input to do this. I've looked in the software ov review, but I don't see anything pertaining the disabling the stock ELD input.
Can you advise me on this?
TIA
Re: System AFR values when in high cam
Posted: Tue Nov 28, 2023 4:10 pm
by KTuner
Assuming you're using the PRB or RSX codebase and have a tune open, see the parameters section for related settings.