System AFR values when in high cam

husseinholland
Posts: 122
Joined: Wed Sep 12, 2018 2:44 am

Re: System AFR values when in high cam

Post by husseinholland »

Thank you - yes, I see it in the list. The values don't jive with the WBO2 controller, so I will have to review the table I used, it came with the controller, but something has to be wrong.
husseinholland
Posts: 122
Joined: Wed Sep 12, 2018 2:44 am

Re: System AFR values when in high cam

Post by husseinholland »

KTuner wrote: Fri Sep 02, 2022 11:36 am There is a gauge for ELD Input as well.
Hello again

I'd like to re-position my WBO2 input to use the gauge available in the ELD input. I can move my WBO2 signal from Ptank to ELD easily enough, what I can't find its where I disable the ELD, since I will be disconnecting the existing ELD input to do this. I've looked in the software ov review, but I don't see anything pertaining the disabling the stock ELD input.

Can you advise me on this?

TIA
KTuner
Site Admin
Posts: 3744
Joined: Mon Jul 22, 2013 8:13 pm

Re: System AFR values when in high cam

Post by KTuner »

Assuming you're using the PRB or RSX codebase and have a tune open, see the parameters section for related settings.
Post Reply

Return to “KTuner Software”