Trouble reconnecting

Post Reply
fredwithanf
Posts: 2
Joined: Tue Jul 23, 2019 12:23 am

Trouble reconnecting

Post by fredwithanf »

Hi there. I bought a V1.2 last year (April 2018) and everything went without a hitch. Tuned it and everything was great. I wanted to reflash to stock because I'm having some warranty work done but I'm having a tough time getting it to work correctly. Last year when I did the initial install I was on a different laptop, but both were running Windows 10.

Honda 2018 Si
Microsoft Surface Pro 6

I plugged it into the OBD-II port and it lit up blue
Clicked on the car into ACC mode
Plugged tuner into PC and it made the usb recognized chime
Opened Ktuner software and it opened both the registration/login dialogue box and the pop-up about installing drivers
Installed drivers
Registration/login box stayed red at the bottom (no device, etc) but once in a while would flash between yellow and red

I can send photo of serial/ECU/locked VIN as well if you need it.

Thanks!
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Trouble reconnecting

Post by KTuner »

If the LED on the unit is yellow and everything shows fine in device manager you have something third party locking up the port.
fredwithanf
Posts: 2
Joined: Tue Jul 23, 2019 12:23 am

Re: Trouble reconnecting

Post by fredwithanf »

LED on the unit is blue. When you say something locking up the port, you mean the USB port on my PC?
KTuner
Site Admin
Posts: 3745
Joined: Mon Jul 22, 2013 8:13 pm

Re: Trouble reconnecting

Post by KTuner »

Contact support by email.
Post Reply

Return to “General Hardware Questions”