KTuner.com

Ok thanks for the reply. On another quote is there any updates on the antilag feature for this application any time soon?

So i decided to change my tps because once it got to 63% it would dropped to 0%. So simple diagnose tried another its was going up to 73% without dropping so i bought the an upgrade acuity hall efect tps installed it calibrated to 0.5v closed and around 4.6v. Now the ecu on ktuner at iddle it stays ...

Is there a way i can connect my aem uego to my ecu? Im currently using in end user revision 1; on a accord 03
Any help or suggestions are welcome

Thanks a lot for the feature, even tho it says that is on beta not on the released features i was able to setup the 4bar map on the accord with the right map so all my gauges are working.

Si basically i wont be able to do anything until that update comes up; let say i change the pinout to match the rsx would it work with the type s ecm ? Because i really cant wait forever for that to come i would prefered to switch the ecu to haltech or something similar to that

I finally got my built done but i have a issue with my map im running 20psi boost on my engine and the stock map cant support more than 10.5psi so i decided to change it for a 4bar map but this platform dont have custom map support wich leads me to my question, when will this feature be available?

Ok so ill have to wait then, on a different note the anti lag option says its available for this platform but on the actual program it has the red simbol on top of it and wont allow me to select it

Can it be adapted to the car?

I need some help on how to install the solenoid is it pin b21 or not and the second wire does it goes to ground or 12v ignition power?

Engine is k24a4 block with forged rods and pistons(flat top), k20z1 cylinder head with brian crower stage 2 cams, springs and retainers, skunk2 ultraseries intake manifold with 74mm throtle body, aem fuel rail, bosch ev14 1000cc injectors, sidewinder gt3582 turbocharger running at 20psi. I just need...