Search found 42 matches

by bianyy
Fri Mar 12, 2021 4:34 am
Forum: General Hardware Questions
Topic: ECU Resetting Itself While Driving
Replies: 12
Views: 17417

Re: ECU Resetting Itself While Driving

I have same issue on my 0607 accord in-ecu board from I bought it on 2018, I use 0607 RAD factory AT basemap from software and also posted on specific forum board but not solved, so I stopped to use it from that time and keep watching the forum for solution for quite long time.
by bianyy
Sun Nov 15, 2020 5:52 am
Forum: General Hardware Questions
Topic: K-TUNER IN ECU issue
Replies: 5
Views: 9621

Re: K-TUNER IN ECU issue

Hi,i have little strange problem.Sometime when i start engine and turn immeditaley ecu reset for very little time of second.Car stick for moment and ignition again.I hear only relay underdash fast tickling same when i reset ecu manually.Not every day,may be one two times in month.I have remote part...
by bianyy
Sun Nov 15, 2020 5:52 am
Forum: General Hardware Questions
Topic: K-TUNER IN ECU issue
Replies: 5
Views: 9621

Re: K-TUNER IN ECU issue

Have you solve it now? I have same ecu reset problem with you and also hearing underdash relay tickling on my 06 accord in-ecu.
by bianyy
Tue Apr 23, 2019 11:45 pm
Forum: 06-07 Accord Specific
Topic: 07 accord CM5 tuning options
Replies: 38
Views: 48742

Re: 07 accord CM5 tuning options

HI Kt I need your help on assessing my idle issue. After stop when I swith from D to N or P. idle RPM suddenly drop to less than 600 RPM (I set 800 RPM in calibration) for 2 seconds and then back to 800. At the time I saw below things, and I also confirmed idle learn procedure finished: >>>MAP drops...
by bianyy
Tue Apr 16, 2019 3:51 am
Forum: 06-07 Accord Specific
Topic: 07 accord CM5 tuning options
Replies: 38
Views: 48742

Re: 07 accord CM5 tuning options

Hi Kt

Inject size setting in the calibration come from your software for K24A8 is set to 310cc which was knew as 270cc, do I need to modify this if I am running a K24A2 stock? And what should be injector dead time setting for my application?
by bianyy
Mon Oct 08, 2018 10:18 pm
Forum: 06-07 Accord Specific
Topic: 07 accord CM5 tuning options
Replies: 38
Views: 48742

Re: 07 accord CM5 tuning options

KTuner wrote:You mentioned you already had, and those are the only target tables available.
It did not take effect on P or N as the datalog.
by bianyy
Sat Oct 06, 2018 11:37 pm
Forum: 06-07 Accord Specific
Topic: 07 accord CM5 tuning options
Replies: 38
Views: 48742

Re: 07 accord CM5 tuning options

KTuner wrote:Again, because load has been introduced. I don't think you caught that.
ok lets only talk on P and N.
How can I set idle of P to 700 RPM. Just let me know this , thanks.
by bianyy
Fri Oct 05, 2018 11:22 pm
Forum: 06-07 Accord Specific
Topic: 07 accord CM5 tuning options
Replies: 38
Views: 48742

Re: 07 accord CM5 tuning options

The idle target is the same in either mode, as you can clearly see the tables aren't labeled P D N etc. Please read my post again to see if it now makes sense. Hi my friend The problem is they are not the same as you said. idle is 700 on D and 800 on P when setting 700 in kcl. if set 800 in kcl, id...
by bianyy
Thu Oct 04, 2018 10:50 pm
Forum: 06-07 Accord Specific
Topic: 07 accord CM5 tuning options
Replies: 38
Views: 48742

Re: 07 accord CM5 tuning options

In D there is load on the engine. P and N there's not. It should reach your target, though. Please read again my statement. The circumstance is on P it is 800 not as expected 700. On D with breaking it drops to 700 as set in calibration. I assume correct logic should be idle of P is a target idle a...
by bianyy
Wed Oct 03, 2018 12:26 pm
Forum: 06-07 Accord Specific
Topic: 07 accord CM5 tuning options
Replies: 38
Views: 48742

Re: 07 accord CM5 tuning options

There is a forced induction starting point that you would choose in order to start with forced induction. Hi Ktuner, the normal idle speed change did not take effect when I change it to lower than 800. After change the normal idle to 700, on P or N it is still 800, but at D with breaking it went to...

Go to advanced search