Search found 3 matches

by Jake_ns
Mon Jan 02, 2023 11:30 pm
Forum: General Hardware Questions
Topic: Afr cmd randomly changes
Replies: 4
Views: 2994

Re: Afr cmd randomly changes

Knock control was .88 above 6500 rpm. 0 knock count. Just not sure why it won't allow more ignition timing as stock runs 26 or so.
by Jake_ns
Mon Jan 02, 2023 11:28 pm
Forum: General Hardware Questions
Topic: Afr cmd randomly changes
Replies: 4
Views: 2994

Re: Afr cmd randomly changes

Ok I was wondering about that. We have ignition timing extremely low, even less than the stock tune file. It's only around 19 degrees which is too low in my opinion. But no matter what we did it would always knock retard 4 degrees on the top end.
by Jake_ns
Mon Jan 02, 2023 8:42 pm
Forum: General Hardware Questions
Topic: Afr cmd randomly changes
Replies: 4
Views: 2994

Afr cmd randomly changes

Really strange issue here. We are tuning in s.d. 2012 civic si. Do a pull, 13.0 afr across the board. Literally drive 2 seconds down the road, then do another pull, 3rd and 4th shoot right to 11.3 with the afr cmd saying 11.4 even though the wot tables both are set to 12.9. We have tried everything ...

Go to advanced search