KTuner.com

I’ve been looking through the disable menu and I don’t see it, unless I’ve been over looking it.

I still have the k tuner 04-06 TSX ecu, still runs great minus my vtec issue.

Can you turn off the vtec oil pressure switch? I have it wired currently to my vtec solenoid wire since I have the Jdm spool valve. It’s been causing issues and I’d like to just have the one wire and one pin instead of merging 2 pins to 1 wire.

Does this ecu have flex fuel support? Looking at potentially switching to e85 and just want to make sure before I buy the flex fuel converter. Have been driving my booster k24 swap and it feels great, even with the limited options of this ecu when it comes to boost control.

What are all the tools offered for boost? I notice the boost tables where you can correct ignition and fuel, but is there anyway for boost by gear? I was going to get an electronic boost control solenoid but I’m not sure if the ecu can handle it. I have it tuned and running with a turbo now, runs an...

I ended up keeping those deadtimes and added some fuel and it runs fine now, I have it running slightly rich but better rich than lean. Once I take it to a tuner I’ll have them double check everything.

I got these injectors and I’m not sure of the dead times, they didn’t come with them and I’m not 100% sure how to calculate.it says to take a scatter plot with MAP divider AFR on the X axis And injectors on the Y axis to find dead times. So do I goto wideband 02 for afr? I tried just using the prese...

I already purchased and am using the ktuner ecu for the TSX. I currently have the base map for the TSX in it and it runs great, I was just looking for support for tuning when installing the turbo kit, I got this ecu so I could learn to tune I just don’t want to damage my engine in the process.

Hello, I have a 1985 Fiero with the harness and ecu from a tsx, Jdm k24a, and a rebuilt 6 speed trans. Currently it runs great N/A, but I’m about to install a turbo kit. I see KTuner has a boosted tsx file, but is it safe to run with boost or do you need it tuned? I know I have to change the injecto...