KTuner.com

Quick question, I have a 0-100psi Auto-meter oil pressure sensor that has one wire that runs to a analog guage, can I run that same wire to one of the 4 Analog inputs on my End-user R1 board and set the guage up on the software?

I can't seem to find any Information about how to utilize the Input harnes that plugs into the End_User board. Do yall have a section that I've missed or something?

Is it not possible to use a GM 3Bar map sensor? The map sensor selection only has "factory & 4Bar omnipower". If it's possible how can it be done? Can I just put the GM 3Bar scaler and offset settings and click on omnipower 4Bar? Or could I put the GM sensor setting under the factors m...

JW?
I've always used the a3 "tuned" map to start tunning from. But I was checking out the stock map and noticed it had more cam angles ? Why doesn't both the 5speed a3 maps use the same ammout of cam angles?

Can anti-lag be activated via a button, like my unused cruise control?

My lambda overlay cells are empty in high cam. Can I make it show data while in high cam?

I have my E85 plugged in my ECU "easy install", but I bought 2 temp sensors. A 1 wire and a 2 wire temp sensor, Just curious how and wich wires on the Auxiliary harnesses that came with my ktuner R1 can I run the temp wires to? I have the red black yellow white green Auxiliary ktuner harne...

I have a feeling my acuity tps is going out because my throttle has been kinda Jerky. I zero it out and it temporarily fixes it. Since it's a hall effect sensor I'm sure it goes bad with different symptoms than a brush style tps.

The stft use to go away in open loop, now it stays on correcting. The corrections only show + - 1 or 2%. It still shows roughly 13.5afr at wot, just asking. The only thing I changed Is The 20% wot and the cut off to 18%. What would cause this? My tps?

I noticed my car still shows stft when I go In open loop after my 20% tps threshold, it never use to do this. I have a Acuity tps, I think it might be going bad. Would that cause this? The afr still shows 13.5afr it wot. The sftf just still show its trying to compensate.