Search found 14 matches
- Wed Apr 03, 2024 7:24 pm
- Forum: K Swapped Vehicles
- Topic: FLEX sensor pin
- Replies: 5
- Views: 1597
Re: FLEX sensor pin
Wiring done, sensor plummed. As far as the software (Yes, I will get it profesional tuned, But for now I need the car to drive). Do I have to do both, change the fuel type under preferences>Fuel setting to Ethanol and set the FLEX table? Or is the FLEX Table the only thing to adjust when dealing wit...
- Tue Feb 27, 2024 2:09 am
- Forum: K Swapped Vehicles
- Topic: FLEX sensor pin
- Replies: 5
- Views: 1597
- Tue Feb 20, 2024 1:16 am
- Forum: K Swapped Vehicles
- Topic: FLEX sensor pin
- Replies: 5
- Views: 1597
FLEX sensor pin
Good evening KTUNER.
Getting ready to install a FLEX sensor on my K Swapped Supercharged CRX. I see in the Help section the in the Ktuner Rev 1 the right two pins are used. The right pin is ground, the middle pin is for the flex fuel input.
I have a Rev 1.1, is the pin out still the same?
Getting ready to install a FLEX sensor on my K Swapped Supercharged CRX. I see in the Help section the in the Ktuner Rev 1 the right two pins are used. The right pin is ground, the middle pin is for the flex fuel input.
I have a Rev 1.1, is the pin out still the same?
- Tue Jun 15, 2021 12:46 pm
- Forum: K Swapped Vehicles
- Topic: TPS read during logging
- Replies: 2
- Views: 6553
- Tue Jun 15, 2021 3:19 am
- Forum: K Swapped Vehicles
- Topic: TPS read during logging
- Replies: 2
- Views: 6553
TPS read during logging
Good evening, I have recently replaced my OEM TPS for an Acuity, reason being was because at WOT the OEM only read to 81%. Even after adjustment on the software. So, I replaced it thinking it was bad. Now, the Acuity is doing the same. I manually adjusted it using my voltmeter and their instructions...
- Tue May 18, 2021 9:24 pm
- Forum: KTuner Software
- Topic: Ktuner latest update
- Replies: 16
- Views: 17481
Re: Ktuner latest update
Thank you Very much for all the help, and email replies. This is the reason why stay with Ktuner, customer service and support is just the best.
The problem was resolved, I shipped my unit to them for troubleshooting and ECU as well. My CRX is back and operating normally.
Thank you!!!
The problem was resolved, I shipped my unit to them for troubleshooting and ECU as well. My CRX is back and operating normally.
Thank you!!!
- Thu Apr 29, 2021 9:58 pm
- Forum: KTuner Software
- Topic: Ktuner latest update
- Replies: 16
- Views: 17481
Re: Ktuner latest update
Email sent, hope to hear from you soon.
- Thu Apr 29, 2021 9:12 pm
- Forum: KTuner Software
- Topic: Ktuner latest update
- Replies: 16
- Views: 17481
Re: Ktuner latest update
I did some more troubleshooting. I installed the software on my wife's laptop with is like 100 years newer than mine. Same problem, same error communicating. The bottom left conection box next to the "live" box stays at "Authenticating". I guess something really, randomly happen ...
- Thu Apr 29, 2021 6:21 pm
- Forum: KTuner Software
- Topic: Ktuner latest update
- Replies: 16
- Views: 17481
Re: Ktuner latest update
Let me just say Thank you for all the replies, this is why I went Ktuner instead of anyone else, customer support is on point.
It states:
"erase failed. Please restart The ECU and KTUNER Hardware to try again. 0"
It states:
"erase failed. Please restart The ECU and KTUNER Hardware to try again. 0"
- Thu Apr 29, 2021 6:05 pm
- Forum: KTuner Software
- Topic: Ktuner latest update
- Replies: 16
- Views: 17481
Re: Ktuner latest update
Here is what the "erased failed" still promps. Thats why I removed the ECU of its power to rest it.