Ktuner v2

Questions about your KTunerFlash V2 Hardware

Re: Ktuner v2

Postby bbeem » Fri Feb 08, 2019 5:46 pm

Thanks! Enable bluetooth pin advanced was the trick. I am not able to use the cruse control buttons to select tunes. is that because i only have 1 tune on slot 1? perhaps loading the other slots will enable me to choose a tune with the cruse buttons? Also I purchased from TSP with TSP stage 1 tune. problem is the tune is for 37805-5AM-A03 and my ECU is 37805-5AM-A120 and not compatible. Is there changes i can make to get the program to run on the newer 2019 si or will i have to wait until TSP creates a different version? I have sent them a ticket and email this week with no response, no phone number to call, not too excited about their service, $80 tune that doesn't work and no replies.
bbeem
 
Posts: 3
Joined: Fri Feb 08, 2019 3:30 am

Re: Ktuner v2

Postby KTuner » Fri Feb 08, 2019 8:48 pm

I think you called and actually did get the tune for 19, sounds like they sent 17-18.

If the features aren't working for you then you're not on a tuned flash. We went over that on the phone. Shoot an email in if you have any additional questions!
KTuner
Site Admin
 
Posts: 1798
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ktuner v2

Postby bbeem » Fri Feb 08, 2019 8:51 pm

was sent the correct tune for the 19 just now. go through the about 8 minute process flashing until it reaches the key off, wait, key on, wait 6 seconds, click ok to continue. when i do this procedure and click ok it says failed to key off and on and goes into recover mode. then restore. unable to complete past this step.
bbeem
 
Posts: 3
Joined: Fri Feb 08, 2019 3:30 am

Re: Ktuner v2

Postby KTuner » Fri Feb 08, 2019 9:58 pm

You had an email in so we will continue there.
KTuner
Site Admin
 
Posts: 1798
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ktuner v2

Postby only9balls » Tue Feb 12, 2019 11:59 pm

I see that you do support the 2019 model with ECU #'s 37820-5AM-A11 through A12 (listed on your web site). My ECU is an 37820-5AM-A12, so does this mean the product has full support for mine as of now? Or will I still be waiting for the rev-hang disable feature until a later date?

Thanks for all your feedback, I am also following the version page as well now!
only9balls
 
Posts: 6
Joined: Sun Jan 27, 2019 3:28 am

Re: Ktuner v2

Postby KTuner » Wed Feb 13, 2019 12:28 am

Full support!
KTuner
Site Admin
 
Posts: 1798
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ktuner v2

Postby only9balls » Wed Feb 13, 2019 12:48 am

KTuner wrote:Full support!


Well then... you need to take my money now! :)
only9balls
 
Posts: 6
Joined: Sun Jan 27, 2019 3:28 am

Re: Ktuner v2

Postby KTuner » Wed Feb 13, 2019 2:16 pm

One of our dealers can definitely help you out. We don't compete with our own people for sales, so we don't sell direct.
KTuner
Site Admin
 
Posts: 1798
Joined: Mon Jul 22, 2013 8:13 pm

Re: Ktuner v2

Postby only9balls » Sun Mar 03, 2019 8:20 am

KTuner wrote:One of our dealers can definitely help you out. We don't compete with our own people for sales, so we don't sell direct.


Got my tuner, flashed the Factory/23psi map, and it is sweet! :) Great product!

Now I just need to scan the forums and Interwebs for recommended settings for things like two-step, throttle response, throttle padding, and stuff like that :)

Thanks for your help!
Dave
only9balls
 
Posts: 6
Joined: Sun Jan 27, 2019 3:28 am

Re: Ktuner v2

Postby KTuner » Sun Mar 03, 2019 4:54 pm

Glad you're enjoying so far! Check out CivicX, as there's been a lot of setup sharing!
KTuner
Site Admin
 
Posts: 1798
Joined: Mon Jul 22, 2013 8:13 pm

PreviousNext

Return to KTunerFlash V2 Specific

Who is online

Users browsing this forum: No registered users and 0 guests